[cityline]

Hallo,
i've nokia e90 version 210.34.75 12-04-2008 Ra-6 and i want to install Nokia_ICC_Cisco_1.58 but i'm unable to create a cisco profile, when i enter setting i can't exit and don't save profile.
Any solution?

Thanks

[pamahone]

Hi,

Could you try to activate the licence and reboot the phone after installation.


-Pasi-

[cityline]

hi,
i've just activate licence and reboot phone, but the problem is the same.
Thank's

[pamahone]

Hi,

And you have defined mandatory fields? (name and AP)
You could also try what happens if you try to configure SCCP with internet tel. application
(Connectivity->Internet tel.-> Options-> Configure service)

Do you have SIP-profiles in your phone?

-Pasi-

[hrenotavr]

Hi pamahone, may i continue this topic, because i have same troubles?

Maybe it isn't too late?

Yes, i filled both AP and name. If i fill (select) AP only, it is posible to exit without saving profile.

If i fill name and AP, it is impossible to escape from profile settings.

I tried to fill all other fields. Unable to change "My caller ID" field, unable to exit form, only switch off phone helps to close the form.

Yes, i tried to configure SCCP with internet tel. application
(Connectivity->Internet tel.-> Options-> Configure service)

Phone asks me to set up service (Nokia CC Cisco), i choose Ok, select access point, and receive message "Unable to set up service".

Yes, i tried to set up sip profile last year, but now it is not working. After all i delete it, but it isn't helps too

Pls help!

Regards,

Dmitry

[pamahone]

Hi,

It's never too late to ask

What is your firmware and device E90? type *#0000#

Problems sound very weird. Have you also activated the licence?

Open NCC application to activate it.

My caller ID field cannot be modified. You wiil get ID from CUCM

-Pasi- 

[hrenotavr]

pamahone, thanks for your reply!

210.34.75

RA-6

Nokia E90 (16)

Yes, i activated 60-day licence.

Message Edited by hrenotavr on 11-Feb-2009 02:33 PM

[pamahone]

Hi,

What other applications you have installed to your phone?
Is it possible you to test NCC with clean phone?

-Pasi-

[hrenotavr]

Hi pamahone,

many thanks! I fully reset my phone and now it works!

Later i'll try to find why it is not works before reset..

And now one more simple question - where to buy this app?

[pamahone]

Hi,

I'm happy to hear it's now working.

You can order full licence code from Cisco channel or from web (eg. Google NOK-SCCP-CCM-01=).
It has the name Intellisync but don't worry about it.

-Pasi

[gchiarella]

Hi pamahone.

I've installed the trial on a E71. Everything was ok. After the trial period, i've bought NOK-SCCP-CCM-01=. I received it from my Cisco distributor. But on the license I can't find the 12 character number useful to unlock the license. What shall I do now?

- Gianpaolo - 

[pamahone]

Hello,

Is there 11 digit long code in your purchase information letter?

If there is just add 0 to begin of the code and try again.

-Pasi-

[gchiarella]

Yes, I have 11 characters. I will try and I'll let you know.

Thank you.

Gianpaolo.

[haithamhammoud]

Dear All,

I have Nokia ICC cisco intalled in my e90 communicator, i used it during the trial, now the license expiredand ask to enter tge license code.
How get i purchase a licensed version?? your effort is apreciated.

Thanks,

[gchiarella]

Hi. You can buy it in the CISCO Channel, I mean you must ask to a Cisco Reseller/Distributor the product NOK-SCCP-CCM-01 (may vary if you have CCM or CME).

Bye

[manmohansj]

HHello Team,

I installed the trial version of Nokia ICC on E71. I am trying to register onto my call manager. It shows 'no active profile' onto the phone display.

Can somebody  help in with this regards.

-Manmohan Singh

[gchiarella]

Hi, I'm a simple user, and not part of the Nokia team.

However I will try to help you the same.

First of all, which kind of Call Manager do you have? Version Number?

Bye. 

[manmohansj]

I am using Cisco Call Manager Versoin 4.2

[gchiarella]

I'm using E71 with Communication Manager 6.1. In effect, looking at the documentation, the compatibility with Call Manager 4.x must be guaranteed.

However i tell you that you must configure it as an ip phone 7970, putting the mac address of the E71/E90. Then restart the phone and try to link it to your Wireless LAN correctly. Entering the Intellisync software you'll find a profile automatically.

Did you find all the documentation about Intellisync in the Cisco Website?

[pamahone]

Hello guys,

Documentation can be found from here:
http://www.businesssoftware.nokia.com/nokia_intellisync_call_connect_for_cisco_downloads.php

Br,

-Pasi-