2009-09-20
9:27
- last edited on
2009-09-20
11:14
by
ravin514151
Solved! Go to Solution.
2009-09-20 10:57
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!
2009-12-16 8:50 - edited 2009-12-16 8:53
2009-12-16 12:22
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!
2010-05-04 17:05
my 6300 ran out of battery just as the alarm came on.and as u know the 6300 has a very small phone memory..so each time i switch it on it ask's me for my security code and even though i type in the correct code it just hangs and restarts automatically..is there any way of formating the phone without putting it on??
2010-05-04 17:28
2010-05-04 17:31
which 3 keys should be pressed when the on button is pressed??
because i tried the call,'*' ,3 n it doesnt work...it just starts normally really appreciate your help thanks..
2010-05-04 17:36
2012-03-11 2:42
i just give the software update in my nokia 6300 phone but its not switching
2012-03-12 5:51
gladiatorjony wrote:i just give the software update in my nokia 6300 phone but its not switching
Though its not very clear..it seems the phone is NOT switching ON after a Software Update. In that case only thing you may try is remove the battery for a couple of minutes.. Insert, and see if it switches ON. Else, you may have to take the phone to Nokia Care...
2012-12-10 20:00
2012-12-19 15:22
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!
2013-01-09 8:53
2013-01-09 9:01
The default Security code is 12345 unless changed by you. If you have, but do not remember it the only way to get it reset is thru' Nokia Care. You may need to produce a proof of ownership (Bill / Invoice)
2013-01-09 16:13
2013-01-09 17:50
You may find Nokia Care thru' THIS link , but for getting the code reset you need to either carry or send the phone to it ...