[alexandraKa]

Hello,

maybe you are right the problem is the flashing images.

How could I be sure to have the good flashing images ?

My N9 is the black 64Gb, Made in Finland, 059H2M6

So, it should be the one selected in the attached picture, isn't it ?

then...

Zeroize device (destroys user data)

 mv DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin main.bin
 mv DFL61_HARMATTAN_40.2012.13-7.ALPS_EMMC_ALPS.bin emmc.bin

Then, no update at all (as I have the PR1.3)... just wifi connection.

ok, so I will publish the report as soon as it is done.

Thank you for your support !

[aspergerguy]

@alexandraKa

Just a little surprised at your choice of target for software, as I would have put them in C:\Program Files > Nokia > Flasher

[alexandraKa]

Hello !

so... here is the flashing log :

Microsoft Windows [version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Tous droits réservés.

C:\Program Files\Nokia\Flasher>dir

Le volume dans le lecteur C n'a pas de nom.
Le numéro de série du volume est 583F-0075

Répertoire de C:\Program Files\Nokia\Flasher

19/12/2012 23:02 <REP> .
19/12/2012 23:02 <REP> ..
18/12/2012 00:09 267 865 469 DFL61_HARMATTAN_40.2012.13-7.NOMAPS_EMMC_NOM
APS.bin
18/12/2012 00:49 1 248 135 798 DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-O
EM1-958_ARM.bin
28/02/2012 20:05 1 666 221 445 emmc.bin
23/06/2011 09:44 3 258 flasher-man.txt
06/10/2011 09:36 342 096 flasher.exe
10/11/2012 00:46 <REP> help
10/11/2012 00:46 <REP> licenses
06/08/2012 13:29 1 248 135 798 main.bin
23/06/2011 09:44 4 565 README.txt
10/11/2012 00:46 4 996 unins000.dat
10/11/2012 00:46 714 526 unins000.exe
27/03/2012 18:50 2 921 564 zImage
10 fichier(s) 4 434 349 515 octets
4 Rép(s) 63 611 502 592 octets libres

<--- renommage des images .bin -->

C:\Program Files\Nokia\Flasher>flasher -i
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1501
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_001
Success

C:\Program Files\Nokia\Flasher>flasher -f -F main.bin --erase-user-data=secure
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Found device RM-696, hardware revision 1501
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 8498 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1501
Server implements softupd protocol version 1.8

Battery level 89 %, continuing.
Erasing, this may take a while.
Erase done.
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 89 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 2869 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1799 kB/s]
[x] rootfs [finished 100 % 1170282 / 1170282 kB 11275 kB/s]
Updating SW release
Success

C:\Program Files\Nokia\Flasher>flasher -f -F main.bin -F emmc.bin --flash-only=m
mc
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1501
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image cmt-2nd skipped
Image cmt-algo skipped
Image cmt-mcusw skipped
Image xloader skipped
Image secondary skipped
Image kernel skipped
Image moslo skipped
Image rootfs skipped
Image tar skipped
Image config skipped

Battery level 90 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] mmc [finished 100 % 261587 / 261587 kB 14780 kB/s]
Success

C:\Program Files\Nokia\Flasher>flasher -R
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1501
Server implements softupd protocol version 1.8
Success

C:\Program Files\Nokia\Flasher>

Then I boot the phone, configure the wifi, configure my nokia account.

start nokia maps. Then, Nokia maps indicates me my position (but this is due to internet connection).

I did download the germany map and enabled the developer mode... that is all

[alexandraKa]

so... I tried the GPS this morning. Connection via 3G.

no way to catch the signal. I will retry later on the terrace at home.

here is my syslog.

[alexandraKa]

Happy new year !

the GPS still does not work... arf...

what shall I do ?

Kind regards

Alexandra

[aspergerguy]

---

alexandraKa wrote:

the GPS still does not work... arf...

what shall I do ?

---

If device still within warranty period you could consider returning for repair, although an N9 with non-functioning GPS may be worth a lot more to you than a working device of commensurate value which is Nokia's only warranty obligation to you.

[alexandraKa]

sorry, I am still thinking about a solution... I am quiet sure this is not a hardware problem, but just a soft...

I got the cell phone with the PR1.1 then the GPS was working.

Actually, I have the PR1.3

Would it be possible to downgrade the cell phone to the original firmware (1.1) ?

I read that it is a bit tricky to do... did anyone tried ?