[SITI87hajar]

Hi,

Yesterday after taking some picture using my Nokia N9, I'm trying to share those picture to my Facebook. Suddenly my phone started to freeze so I just do a long press on the power button, and, there you go. The phone is half-dead now. It shows only NOKIA welcome screen and then the screen goes blank.

I'm running on firmware v20. Anyone having the same problem here? 

[aspergerguy · Accepted solution]

@SITI87hajar

It sounds as if your N9 has now entered a "Boot loop" and I had to solve this upon my N9 by putting into R & D mode using another application and then re-install existing firmware with standalone Nokia Software Updater http://nds1.nokia.com/files/support/...erSetup_EN.exe

cpitchford from this forum has written upon the subject:http://forum.meego.com/showpost.php?p=34698&postcount=9

If any of this takes you outside your comfort zone, there is probably no alternative other than to take device to a Nokia Care Point should N9 be supported in your region.

[SITI87hajar]

Thanks for the advice. My N9 is back to life, again. I used to connect the phone to the NSU and do something that I don't really remember the steps.

[michan]

I have a similar issue with mine, but it doesn't turn itself off after a while. I've kept it on over the night and it still displays "NOKIA" with capitalized white letters.

What's the Linux equivalent to the updater software?

How am I supposed to open a terminal when all the phone does is displaying the startup screen?

[aspergerguy]

---

michan wrote:

What's the Linux equivalent to the updater software?

---

Whilst there is a Flasher tool for Debian Linux under Maemo, AFAIK none such exists for Harmattan unfortunately!

[kirank]

Can you please provide me the detailed steps and links for the necessary software to solve this issue.

[aspergerguy]

---

kirank wrote:
Can you please provide me the detailed steps and links for the necessary software to solve this issue.

---

Unfortunately that is not possible upon this manufacturer's sponsored forum due to warranty considerations using non-authorised software and post would be moderated. The necessary information for this open source device is available, but as I have reiterated before if using Terminal commands takes you out of your comfort zone then perhaps better not proceeding down this route.

[sms4598]

Are there any other solutions.. I have no idea what to do with mine. Its the same problem where its in an inifinite loop. I am running windows 7 and I have no idea what to do..

[Fizzie11]

SInce my phone doesnt start up. I would i get it into usb mode so it can show up on the computer

[scoobyman]

Depends upon whether "flasher" can recognise your N9:http://talk.maemo.org/showthread.php?t=82693

[wilard]

mine wen ever i charge it it boot nd show exclamation mark. its being twon month

[scoobyman]

@wilard

Not clear from yoiur post whether you mean the display shows (with a big exclamation mark on yellowish triangle):

Device is malfunctioning. You may try re-flashing the software. If you are unable to do so, or the problem, or theproblem persists after flashing, please contact service.

or exclamation upon battery icon here:

[dani8501]

AND IF U COULD NOT NOT DO THIS THEN TELL ME  MUST  I WILL  MAKE  COMPLETE GUIDE VIDEO FOR U AND WILL GIVE U LINK FOR THAT  WELCOME EVERY TIME