I was happy to notice that PR 1.2 was released and immediately started updating. The update went swell untill 91%, at which point the phone asked about connecting to Internet, since it had for some reason dropped from my WLAN. I reconnected the phone to the WLAN, and now it's been stuck at 91%. When I lock and unlock the phone, I can see the small plane image in the locking screen indicating that the phone is in flight-mode. Have I screwed up the update, and what can I do for now?
I tried to reconnect the phone to the net by going out of the house so the WLAN connection would drop. It did, and the WLAN connection was established again, but the progress meter is still stuck at 91%. I need my phone tomorrow, so I am going to reboot and if something goes wrong, I'll try to restore the factory settings.
I lost all the contacts and images. In addition the camera does not work anymore (message: "camera don't response, try again or boot if does not help") nor I cannot write anything because the keyboard does not appear.
It seems it depends on at which point the update goes wrong, after rebooting from 91% and doing a system restoration the phone has so far been working perfectly for me.
agrees but the option is not there, no NSU update, or at least not in Norway.
Sorry your post seems a little ambiguous, does your N9 have a European product code as this is result using N9 with NDT North Europe product code? It's not all good news as can take 85 minutes to download and install!
Happy to have helped forum with a Support Ratio = 42.5