How to find the description of the code and how to check if an update is available cannot be discussed here
But I assume ceroberts75 will keep you updated...
Which code do you have?
post your product code and i can help you know if there has been a pr1.2 released for your varient....at a small fee of course...absoluty free!
after instaled this update, maps cant be used anymore. only drive online if no any maps allready instaled on the phone.
strange. seems to work fine on my device.
maybe check to be sure that they are installed still, in case you need to reinstall the maps.
there you should see the maps in your device, if there is nothing there then tap the menu/add maps and select the maps to install.
just in case, remember that the maps are not the satelite views and that view type requires an internet connection. the maps that are installed are only the standard virtual type.
also, i cannot say for sure that the downloaded maps include the 3d data for buildings. it may require you to have internet access for that too.
2012-03-21 0:25 - edited 2012-03-21 0:27
I am currently playing with two N9 devices:
PR1.2 ==> 059J1V4: RM-696 NDT AUSTRIA BLACK 64GB
PR1.1 ==> 059M8W6: N9 RM-696 Country Variant Switzerland CH White 64GB V1_COLOR
And of course I am monitoring the codes as well
And no maps issue at all so far for the PR1.2 device... Maybe I didn't catch the point here... but of course maps should be installed or maybe updated if already installed.
2012-03-21 0:48 - edited 2012-03-21 0:49
And for all guys here who are unpatient:
The PR1.1 for the 059M8W6 Switzerland White was released on February 21st 2012... means three months later than start of PR1.1 in November 2011 and one week before start of PR1.2.... And I am still alive
And I am aware that it might happen again...
That's why I wanted to be on the safe side with the black one
here....059K9Q3.....i rilly needs updates!!!!
059K9Q3: N9 RM-696 Vodacom ZA Black v1 16GB
059K9Q3: N9 RM-696 Vodacom ZA Black v2 16GB
you do need an update.
but it is Vodacom holding you back. you still have the pr1.0 original release. there is no listing of your product code for pr1.1 or pr1.1.1 or pr1.2.
at first, i thought your product code was wrong.
i hope they give you one soon.
the problem is i cannot open maps, it says" maps not responding close application" nothing else. ive tried to delete and reinstal maps, the sistem doesnt leave me to delete and cannot reinstal it says " maps allready instaled".
Do you have one of these product codes?
059M0N2: N9 RM-696 Country Variant Portugal PT V1-Black 16GB
059M1L7: N9 RM-696 Country Variant Portugal PT V1- Cyan_COLOR 16GB
059M1L8: N9 RM-696 Country Variant Portugal PT V1-Magenta_COLOR 16GB
059M1L6: N9 RM-696 Country Variant Portugal PT V1 - Black 64Gb
They are not listed for PR1.2 so far.... but the same applies also e.g. for country variants of Australia or Switzerland.
I have a N9 Black 64Gb... not sure what is the product code... but i'm from Portugal... and you're right, i don't see a Country Variant Portugal... can you tell me where is available?